Kyosho

Kyosho Servo Saver Strong Ring

Kyosho Servo Saver Strong Ring

Kyosho Battery Holder (RB5)

Kyosho Battery Holder (RB5)

Kyosho MINI-Z Sports LED Light Set (MR-03S & Mini-Z 4X4)

The Kyosho MR-03S MINI-Z Sports LED Light Set features two clear and two red LEDs, and plugs in directly to the top of the board on chassis for easy installation. This gives you headlights and brake lights that light up according to throttle operation...

Kyosho Mini-Z 8.5mm Racing Radial Tire (4) (20 Shore)

This is a set of four Kyosho 8.5mm Racing Radial Tires. These radial tires are used with the Mini-Z Racer series kits, and feature a special patterned edge that is effective on both urethane and carpet surfaces. Specific left and right sides feature a...

Kyosho XSpeed Mini-Z Motor-V (MR-03EVO)

XSpeed Mini-Z Motor-V (MR-03EVO) Mini-Z X Speed brushed motor for MR03 Evo. I.C.S. USB adapter is required to change to brushed mode.

Kyosho XSPEED Motor-V (2.4GHz)

This is an optional Kyosho XSPEED Motor-V. This is a high revving motor that will help to improve maximum speed and acceleration, and has been optimized for use with 2.4GHz equipped Mini-Z vehicles. COMPATIBILITYKyosho MR-02Kyosho MR-03

Kyosho Mini-Z MR03 Circuit Wide Rear Tire Pack

This is a Kyosho MR03 Circuit Wide Rear Tire Pack, a set of options for MINI-Z RWD ideal for beginners. This pack contains a pair of 30-deg low height slick tires, two pairs of high grip wide radial tires (20-deg and 30-deg), pairs of red and purple...

Kyosho Mini-Z Tool Set 2

This a Kyosho Mini-Z Tool Set 2, intended for use with the Kyosho Mini-Zs. This set has improved tool tip shapes and includes various tools needed for maintaining a Mini-Z. This set cones in a soft case printed with a Mini-Z logo.

Kyosho Mini-Z LM Wide High Grip Rear Tire (4) (30 Shore)

This is a set of four Kyosho High Grip Front Tires, for use with the Kyosho Mini-Z MR LM Type chassis. Choose from 20, 30 and 40 Shore compounds (softest to hardest). 40 Shore is the standard compound included with Mini-Z MR LM kits, with 20 and 30 being...

Kyosho Mini-Z LM High Grip Front Tire (4) (30 Shore)

This is a set of four Kyosho High Grip Front Tires, for use with the Kyosho Mini-Z MR LM Type chassis. Choose from 20, 30 and 40 Shore compounds (softest to hardest). 40 Shore is the standard compound included with Mini-Z MR LM kits, with 20 and 30 being...

Kyosho Mini-Z LM High Grip Front Tire (4) (20 Shore)

This is a set of four Kyosho High Grip Front Tires, for use with the Kyosho Mini-Z MR LM Type chassis. Choose from 20, 30 and 40 Shore compounds (softest to hardest). 40 Shore is the standard compound included with Mini-Z MR LM kits, with 20 and 30 being...

Kyosho ASC ASC MR-03W-MM McLaren Senna GTR Orange MZP243OR

MZP243OR ASC MR-03W-MM McLaren Senna GTR OrangeOrange McLaren Senna GTR Autoscale body for Mini-Z. Fits MR03W-MMWheelbase: LL 98mmWheel Offset: F: N+2.5 / R: W+3* This product is a spare body set and cannot be run. To enjoy driving as an RC model, please...

Kyosho Mini-Z X-Speed V Motor

This is an optional Kyosho Mini-Z X-Speed V Motor, and is intended for use with the Kyosho Mini-Z MB-010 Ultima and Optima buggies, as well as the MA-010 and MA-015 AWD Mini-Z's. This is a high revving motor that provides increased top speed and...

Kyosho MA-020 2.0 Mini-Z Unit Set (RA-45)

Kyosho MA-020 2.0 Mini-Z Unit Set. This replacement unit set is intended for the AWD Kyosho MA-020 Mini-Z chassis. The built in receiver unit is designed to work with the FHSS KT531/431PT units. Package includes one R/C unit set.NOTE: Not compatible with...

Kyosho Swing Shaft (CVD 1pc/L=93)

Kyosho Swing Shaft (CVD 1pc/L=93)

Kyosho Fuel Tank Stay & Servo Tray Parts Set (TKI3)

Kyosho Fuel Tank Stay & Servo Tray Parts Set (TKI3)

Kyosho 30mm Brake Rotor (MP9)

Kyosho 30mm Brake Rotor (MP9)

Kyosho Fazer FZ02 TC Spur Gear (68T)

Kyosho Fazer FZ02 TC Spur Gear. Package includes one replacement 68T TC Spur Gear, compatible with the FZ02 and FZ02L series chassis.

Kyosho Aluminum Heat Shield Tape (40x2500mm)

This is a 40x2,500mm roll of Kyosho Aluminum Tape. This tape can be used to re-enforce your bodies, protect your paint from wear, or to help protect your body and fuel tank from heat damage.

Kyosho 2.4x6mm Fuel Tubing (100cm)

This is a pack of fuel tubing for Kyosho buggies, and fits the Inferno MP10 and Inferno family of buggies. Included is one meter of fuel tubing (a little more than 3 feet).Specifications:Length: 100cm (3.3ft)Inner Diameter: 2.4mmOuter Diameter: 6mm