(RS) Servo Horns

Powerhobby CNC Machined Aluminum Micro 25T Servo Horn / Arm : 59MG

Aluminum Micro 25 Tooth Servo Horn / Arm : 59MG Features: Light Weight High Precision High Durability High Precision CNC Machining

Reefs RC Shorty Micro Horn (Black) (25T)

Reefs RC Shorty Micro Horn. Designed for micro servos such as the Reefs RC 99Micro and 179Micro this shorty servo horn is built to last. Constructed from CNC machined aluminum this shorty style arm uses a 25T spline and features three mounting positions...

ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Long) (25T)

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 25mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

ProTek RC Aluminum Flat Clamping Servo Horn (Black) (25T-ProTek)

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features...

ProTek RC Aluminum Clamping Servo Horn (Black) (25T)

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 23 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Black) (25T)

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 25 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

ProTek RC 4mm Aluminum Long Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 23 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

Losi Aluminum Servo Arm 25T: Baja Rey Rock Rey

Losi Aluminum Servo Arm 25T: Baja Rey Rock Rey

Losi Steering Servo Arm, 15T Spline: Super Baja Rey

Losi Steering Servo Arm, 15T Spline: Super Baja Rey

EcoPower 827 Servo Horn Set

Torque 37.5 oz in Speed 0.10 sec at 8.4VThis is a replacement EcoPower 827 Servo Horn Set. This is a package of four servo horns, SCX10 III dig servo saver adapter and hardware.

Dynamite Machined Aluminum Servo Arm, Black: JR/Air (Black)

Dynamite's precisely Machined Aluminum Servo Arms offer maximum steering control, as well as instantaneous throttle and brake response by eliminating the flex often associated with nylon and plastic servo arms. These 1/2 arms are drilled and tapped for...

Dynamite Machined Aluminum 25T Futaba Servo Horn (Black)

Dynamite's precisely Machined Aluminum Servo Arms offer maximum steering control, as well as instantaneous throttle and brake response by eliminating the flex often associated with nylon and plastic servo arms. These 1/2 arms are drilled and tapped for...

Team Associated FT Aluminum Clamping Throttle Servo Horn, 25T RC8B3.2 RC8T3.2

FT Aluminum Clamping Throttle Servo Horn, 25TImprove durability and throttle/brake feel with a new Factory Team aluminum clamping throttle servo horn! Machined from high quality 7075 aluminum and laser-etched with Factory Team branding, this aluminum...

Team Associated FT Aluminum Clamping Throttle Servo Horn, 23T RC8B3.2 RC8T3.2

FT Aluminum Clamping Throttle Servo Horn, 23TImprove durability and throttle/brake feel with a new Factory Team aluminum clamping throttle servo horn! Machined from high quality 7075 aluminum and laser-etched with Factory Team branding, this aluminum...

Team Associated FT Aluminum Clamping Servo Horn 25T, 15.5 mm

FT Aluminum Clamping Servo Horn 25T, 15.5 mm Made for 6-series off-road vehicles, these 7075 T6 aluminum clamping servo horns come with a large M2.5 screw and laser-etched spline size for positive identification. The 15.5mm length provides smoother...

Team Associated FT Aluminum Clamping Servo Horn 23T, 15.5 mm

FT Aluminum Clamping Servo Horn 23T, 15.5 mm. Made for 6-series off-road vehicles, these 7075 T6 aluminum clamping servo horns come with a large M2.5 screw and laser-etched spline size for positive identification. The 15.5mm length provides...

Team Associated FT Aluminum Clamping Servo Horn 25T, 20 mm B74.1

FT Aluminum Clamping Servo Horn 25T, 20 mm B74.1These 7075 T6 aluminum clamping servo horns, for 1:10 scale touring cars, include a large M2.5 screw and laser-etched spline size for positive identification. A length of 20.0mm provides smoother steering...

Team Associated FT Aluminum Servo Horn 25T, 18.5 mm

The Team Associated Factory Team Aluminum Servo Horn was designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the...