(EM) Accessories & Fans

ProTek RC Heavy Duty 30cm (12") Servo Extension Lead (Male/Male)

This is one 30cm (12") universal male to male servo extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength. The male plugs installed on these...

ProTek RC JR Style Servo Connectors (4 Pair)

This is a pack of four pairs of JR style servo connectors. Included are four female and eight male connector housings and eight sets of connector pins. These are unassembled, and can be used to repair a bad servo lead, or to construct your own servo or...

1UP Racing UltraLite 30mm 4WD Buggy Fan Shroud (Upper Mount)

This is the 1UP Racing UltraLite 30mm 4WD Buggy Fan Shroud. Designed to maximize the effectiveness of your motors cooling fan this made in the USA shroud gives you a high quality and light weight cooling solution. This 3D printed shroud is a perfect...

1UP Racing UltraLite 30mm Touring Fan Shroud (Bypass Style)

This is the 1UP Racing UltraLite 30mm Touring Bypass Style Fan Shroud. Designed to maximize the effectiveness of your motors cooling fan this made in the USA shroud gives you a high quality and light weight cooling solution. This 3D printed shroud is a...

ProTek RC 40x40x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)

Cooling Fan Overview: The ProTek RC 40x40x10mm Aluminum High-Speed HV Cooling Fan is designed to maximize motor performance by keeping temperatures low and extending motor life. Ideal for high-performance RC applications, this fan ensures consistent...

Furitek Arrma Grom CNC Aluminum & Carbon Fiber Servo Mount

Servo Mount Overview: Arrma Grom CNC Aluminum & Carbon Fiber Servo Mount. Constructed from extremely lightweight and rigid CNC-machined aluminum and carbon fiber for a precision fit, this optional servo mount is intended for the Arrma Grom platforms...

Yeah Racing Aluminum 540/550 Motor Heat Sink w/Twin Tornado Fans (Black)

The Yeah Racing Aluminum 540/550 Motor Heat Sink with Twin Tornado Fans. These optional fans mount on the included bracket and use only one wire for power. This means you get two fans off one power source. The included heatsink mount has been...

Yeah Racing 30mm Tornado Twistex Shrouded Cooling Fan

This is a Yeah Racing Twistex Shrouded Cooling Fan, designed specifically for competition touring cars motors which reach high temperatures. Features a groove in the bottom to allow for routing the cable on either sides for clean installations. Paired...

Yeah Racing 1/8 Aluminum Fan Mount Clamp w/40mm Cooling Fans (Black)

Yeah Racing 1/8 Aluminum Fan Mount Clamp with 40mm Cooling Fans This optional fan mount is great for mounting a fan where space is limited. The fan wires can be feed through a channel to be routed under the motor for clean installation. Included with...

Yeah Racing 1/10 Scale Motor Aluminum Fan Mount (Black)

Yeah Racing 1/10 Scale Motor Aluminum Fan Mount. This optional fan mount is great for mounting a fan where space is limited. The fan wires can be feed through a channel to be routed under the motor for clean installation. This fan mount supports either a...

Hobbywing 1/10 Extended Electronic Power Switch (150mm)

Hobbywing 1/10 Extended Electronic Power Switch (150mm) EPS: Electronic Power Switch for 1/10th Car This Electronic Power Switch controls the ON/OFF of current flow electronically. This helps to solve problems caused by vibration or oxidation of...

Hobbywing Module-X Modified/Stock Non Polarity Capacitor Module

This is a Hobbywing Module-XS Modified/Stock Non Polarity Capacitor Module. A capacitor module is for “upgrading” your car ESC. With this capacitor the start-up acceleration of your vehicle will be greatly improved. Besides, the great ripple...

Hobbywing Multifunction LCD Bluetooth Program Box PRO (G3)

Wireless Program Box Overview: Hobbywing Multifunction LCD Program Box Pro G3! Serves as a program card and a battery voltage checker at the same time, this optional HW Multifunction LCD Program Box Pro G3 is the ultimate tuning tool and a must have...

Hobbywing P3010 JR3P 60MM B (PLT50A V5 / PLT 120A/80A V4 / PLT 100A V3)

Hi Performance ESC Cooling Fan 3010BH-6V, for XR8 and XR8 SCT Black Features: Power: 5V/0.18A 6V/10000RPM Not waterproof JR-3P Male Plug 30x30x30 Specifications: Length: 30mm Width: 30mm Height: 10mm Weight: 8.2g  

Reedy BL2 Program Card

Programming Card Overview:Reedy BL2 Program Card. This optional programming cards is intended for the Reedy SC600-BL2 Sensorless Brushless ESC to easily and quickly change the settings on the fly, anywhere! Package includes one BL2 program card with one...

Power Hobby 5010 (50mm) High Speed ESC / Motor Cooling, Red

Power Hobby 5010 50mm High Speed ESC / Motor Cooling, Red Features: Reverse Polarity Protected Spacing Between Screw Holes is 40mm (Sized for 4mm Screws) Plug: 2 Pin JST/Receiver Wire Length: 280mm Speed: 10,000RPM +/- 10% Max Voltage: 5-8.4v (2 cell...

Power Hobby 5010 (50mm) High Speed ESC / Motor Cooling, Silver

Power Hobby 5010 50mm High Speed ESC / Motor Cooling, Silver Features: Reverse Polarity Protected Spacing Between Screw Holes is 40mm (Sized for 4mm Screws) Plug: 2 Pin JST/Receiver Wire Length: 280mm Speed: 10,000RPM +/- 10% Max Voltage: 5-8.4v (2 cell...

Power Hobby V8 Engine Motor Heatsinks & Cooling Fan, for TRX-4 / SCX10

V8 Engine Motor Heatsinks & Cooling Fan, for TRX-4 / SCX10 Features: Fit 36mm Motor Require Forward Motor High quality scale heatsink, nylon+ fiber with high speed fan(8000rpm), good motor radiation performance Specifications: Application: 36mm...

ProTek RC Heavy Duty EC5 Charge Lead (Male EC5 to 4mm Banana Plugs)

This is a ProTek R/C EC5 Device Charge Lead. This charge lead features two 4mm bullets fixed to 14awg wire.

Yeah Racing 30x30 Aluminum Case Booster Fan (Red)

The Yeah Racing 30x30mm Aluminum Case Booster Fan has been updated with a full aluminum booster case, increasing the air flow directed into the fan. Plus, when mounted on a fan mount or ESC, the large surface area of the aluminum will act as a heatsink...