ProTek RC

ProTek RC Extra Small Body Clip (10)

The ProTek R/C Extra Small Body Clips are heavy duty, chrome plated body clips that are perfect for 1/18 size vehicles. Package includes ten body clips.

ProTek RC 1S USB LiPo Charger (1 Amp) (Sanwa M17 & MT44)

The ProTek RC 1S USB LiPo Charger was developed specifically for ProTek RC PTK-5197 and PTK-5550 1S LiPo transmitter batteries. Have you found that your charger is not fully peaking your transmitter packs? Some high end chargers struggle to put a full...

ProTek RC "Prodigy 610 QUAD AC" LiHV/LiPo AC/DC Battery Charger (6S/10A/100W x 4)

This is the ProTek R/C "Prodigy 610 QUAD AC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger. A quad port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates, worldwide 110V/220V voltage versatility, with 100 Watts of power per side...the...

ProTek RC Sprue Side Cutter

The ProTek RC Sprue Cutter is a great option for cutting plastic parts free, modifying tire pins and even thin gauge wire. Made from hardened stainless steel, these cutters feature comfortable grips with a heavy-duty return spring for better cutting...

ProTek RC Aluminum Ball Stud Washer Set (Black) (12) (0.5mm, 1.0mm & 2.0mm)

This ProTek R/C Aluminum Ball Stud Washer Set includes 3x5.5mm Black anodized aluminum washers in the following thicknesses: 0.5mm, 1.0mm and 2.0mm. There are four washers included for each thickness, equaling twelve washers total.These aluminum washers...

ProTek RC (TruTorque) Lexan Scissors (Curved)

These curved bladed ProTek RC "TruTorque" Lexan Scissors feature a specific blade angle designed specifically for cutting Lexan (Polycarbonate) material. The curved blades are made from High Quality 420 Stainless Steel and are effective at precision...

ProTek RC Starter Box Carrying Bag

The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring nitro vehicle to and from the pits. 1/8 scale tires spinning at several thousand RPMs are dangerous, especially when they’re just a couple of inches from your...

ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Standard) (25T)

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 20mm and 16mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

ProTek RC Dual Offset Heavy Duty Clamping Servo Horn (Long) (25T)

The ProTek R/C Dual Offset Heavy Duty Clamping Servo Horn features a dual offset allowing you to choose the best offset for your setup. The 4mm thick horn has a 25mm and 20mm hole spacing threaded for 3mm hardware to suit the geometry and hardware...

ProTek RC Aluminum Flat Clamping Servo Horn (Black) (25T-ProTek)

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features...

ProTek RC Aluminum Clamping Servo Horn (Black) (25T)

This is a replacement ProTek R/C Aluminum Clamping Servo Horn, intended for use with ProTek R/C servos. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision, rigidity and durability. The horn features...

ProTek RC 4mm Aluminum Short Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)

This is a ProTek R/C 4mm Aluminum Short Clamp Lock Servo Horn, and is intended for use with any servo that uses a 23 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

ProTek RC 4mm Aluminum Long Clamping Servo Horn (Blue) (23T-JR/Sanwa/KO)

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 23 tooth spline output shaft. This extremely tough servo-horn has been machined from a solid block of aluminum for incredible precision,...

ProTek RC 1/8 Off-Road Euro Wing (Black)

ProTek RC 1/8 Off-Road Euro Competition WingProTek RC 1/8 Off-Road Euro Wing. Molded from top quality material to provide supreme durability and reliability, this optional 1/8 Off-Road Euro Wing with tall vertical side dams is intended for 1/8 buggy and...

ProTek RC 117mm Aluminum Camber Gauge (Tall)

This is the ProTek R/C Aluminum Camber Gauge is a precision machined tool that allows for quick and easy camber checks for everything from 1/10 on road, to 1/8 truggy. Lightweight and easy to use this camber gauge features a laser engraved 117mm scale on...

ProTek RC Aluminum Ride Height Gauge (13-45mm)

This is the ProTek R/C Aluminum Chassis Ride Height Gauge. A well tuned chassis can be the difference between making the A Main, and making the podium. Don't let a poorly tuned chassis be the reason why you don't make it on the box! This gauge features a...

ProTek RC Aluminum Ride Height Gauge (3-20mm)

This is the ProTek R/C Aluminum Chassis Ride Height Gauge. A well tuned chassis can be the difference between making the A Main, and making the podium. Don't let a poorly tuned chassis be the reason why you don't make it on the box! This gauge features a...

ProTek RC NiMH Glow Ignitor Charger

The ProTek RC NiMH Glow Ignitor Charger is the perfect compliment for the ProTek SureStart 2 (PTK-7607). This NiMH charger features a 200mA output so it will safely charge NiMH batteries of various capacity, and is compatible with both 100V to 240V* AC...

ProTek RC "SureStart 2" Rechargeable Glow Igniter (1.2V/5000mAh)

The ProTek R/C "SureStart 2" Rechargeable Glow Ignitor features a 5000mAh 1.2V sub-C NiMH battery to allow extended use with the safety and peace of mind that can only come from a NiMH battery. The SureStart 2 is a high quality glow ignitor that can be...

ProTek RC Tamiya To T-Style Adapter (Female Tamiya/Male T-Style)

The ProTek R/C Tamiya to T-Style Adapter is overall 3" in length, and adapts from a T-Style ESC to a Tamiya connector which would connect to a Battery. Assembled with 14AWG wire.