Product Description
Are you ready for the most extreme 3.8" Paddle tires Pro-Line has ever made for 1:8 Monster Truck? Introducing the all-new Dumont 3.8" tires that have been designed from the ground up to sling sand and snow further than ever before and look good doing it!
The Dumont 3.8" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your 1:8 Monster Truck today!
Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.
The Dumont 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO634500). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new pre-mounted Dumont 3.8" tires now!
Please note: All tires & wheels are sold in pairs, unless otherwise noted
No vehicle chassis is included with this product.
Tire Features:
Extreme Paddle Tires for Sand and Snow
Latest Paddle Tire Technology - Large Offset V-shaped Tread
Pro-Line P-L Logos Embedded into Tire Carcass
Incredible Performance and Style!
Made from Very Stiff and Long-lasting Paddle Tire Rubber
Foam Inserts Included
Made in the USA, since 1982
Wheel Features:
Removable Hexes Allow you to Easily Replace Damaged Hexes
17mm Wide Offset 8x32 Hexes (PRO634500) are Included
Wheel Made from High-strength, Durable DuPont Nylon Material
Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
M3 Wheel Hex Hardware Included
Fits:
ARRMA Kraton
MAXX
E-REVO 2.0
SUMMIT
Tekno MT410
Other Monster Trucks with 17mm Hexes
Specs.
Compound / Hardness: Medium
Inner Tire / Outer Wheel Diameter: 3.8 in
Package Type: Pre-Mounted
Product Height: 7.25" (184 mm)
Product Width: 3.26" (83 mm)
Scale: 1/8
Tire Tread: Dumont Paddle
Tire Type: Paddle
Track Surface: Sand/Snow
Vehicle Type: Monster Truck
Wheel Hex Size: 17mm
Wheel Position: Front/Rear
Wheel Type: 10-spoke
The Dumont 3.8" tire uses the latest in paddle tread technology with large offset V-shaped paddles for maximum roosting power. Pro-Line P-L logos have been embedded into the tire carcass giving it the style that you have come to expect from Pro-Line. The Dumont Paddle tire gets its name from the incredible Dumont Sand Dunes in California, but these paddle tires are equally at home shredding your local snowfield in the winter. Don't get stuck spinning your tires in the sand or snow. Get a set of pre-mounted Dumont Paddle tires for your 1:8 Monster Truck today!
Pro-Tip:
When running your Pro-Line Tires in Water, Mud, or Sand foreign materials can enter the Tire. If this occurs, the foam Inserts can begin to break down and the tire can become excessively heavy or unbalanced, causing unnecessary wear. Placing a piece of waterproof tape (such as Duct Tape) over the Wheel Vent Hole is a quick and easy method of preventing anything from getting inside Your Tires.
The Dumont 3.8" tires come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO634500). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the new pre-mounted Dumont 3.8" tires now!
Please note: All tires & wheels are sold in pairs, unless otherwise noted
No vehicle chassis is included with this product.
Tire Features:
Extreme Paddle Tires for Sand and Snow
Latest Paddle Tire Technology - Large Offset V-shaped Tread
Pro-Line P-L Logos Embedded into Tire Carcass
Incredible Performance and Style!
Made from Very Stiff and Long-lasting Paddle Tire Rubber
Foam Inserts Included
Made in the USA, since 1982
Wheel Features:
Removable Hexes Allow you to Easily Replace Damaged Hexes
17mm Wide Offset 8x32 Hexes (PRO634500) are Included
Wheel Made from High-strength, Durable DuPont Nylon Material
Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
M3 Wheel Hex Hardware Included
Fits:
ARRMA Kraton
MAXX
E-REVO 2.0
SUMMIT
Tekno MT410
Other Monster Trucks with 17mm Hexes
Specs.
Compound / Hardness: Medium
Inner Tire / Outer Wheel Diameter: 3.8 in
Package Type: Pre-Mounted
Product Height: 7.25" (184 mm)
Product Width: 3.26" (83 mm)
Scale: 1/8
Tire Tread: Dumont Paddle
Tire Type: Paddle
Track Surface: Sand/Snow
Vehicle Type: Monster Truck
Wheel Hex Size: 17mm
Wheel Position: Front/Rear
Wheel Type: 10-spoke
