NEW ARRIVALS

ProTek RC 4x8mm "High Strength" Flat Head Screws (10)

This is a pack of ten ProTek RC 4x8mm "High Strength" Flat Head Screws.

ProTek RC 4x25mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten ProTek RC 4x25mm "High Strength" Socket Head Cap Screws.

ProTek RC 4x20mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten ProTek RC 4x20mm "High Strength" Socket Head Cap Screws.

ProTek RC 4x16mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten ProTek RC 4x16mm "High Strength" Socket Head Cap Screws.

ProTek RC 4x14mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten ProTek RC 4x14mm "High Strength" Socket Head Cap Screws.

ProTek RC 4x12mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten ProTek RC 4x12mm "High Strength" Socket Head Cap Screws.

ProTek RC 4x10mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten ProTek RC 4x10mm "High Strength" Socket Head Cap Screws.

ProTek RC 4x8mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten ProTek RC 4x8mm "High Strength" Socket Head Cap Screws.

ProTek RC Heavy Duty 30cm (12") Servo Extension Lead (Male/Male)

This is one 30cm (12") universal male to male servo extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength. The male plugs installed on these...

ProTek RC 5mm to 4mm Bullet Reducer (2)

This is a pack of two ProTek R/C 5mm to 4mm Bullet Reducers. These reducers are an absolute must for racers looking to use batteries with a 5mm bullet hole, while continuing to use 4mm bullets on their ESC, and 4mm bullets on their charge leads. Simply...

Tamiya Porsche 911 Carrera RSR 1/10 4WD Electric Touring Car Kit (TT-02)

Iconic German Engineered Racing Machine In 1973, the Porsche 911 Carrera RSR achieved remarkable success, securing victories in 3 international races and 7 domestic events. The pinnacle of its triumphs came at the prestigious Targa Florio race in Sicily...

Yokomo 3x45mm Rear Inner Suspension Arm Pin (2)

This is a pack of two replacement Yokomo 3x45mm Rear Inner Suspension Arm Pins, and are intended for use with the Yokomo BD7 1/10 scale touring car.  CompatibilityYokomo RS1.0 & RS2.0

Yokomo RS 1.0 Gear Differential Bevel Set

Bevel Gears Set Overview: Yokomo RS 1.0 Gear Differential Bevel Gears Set. This replacement set is intended for the Yokomo RS 1.0 Rookie Speed GT1 platform. Package includes one bevel gears set. CompatibilityYokomo RS1.0 & RS2.0

Yokomo Plastic Suspension Mount Bushing Set

This is a replacement Yokomo Plastic Suspension Mount Bushing Set. These resin suspension mounts are standard equipment for the BD8 and include five kinds of bushings. If you combine the selection of the bush, the mounting direction, and the selection of...

Yokomo BD9 3mm Front Outer Suspension Arm Pin (2)

This is a pack of two replacement Yokomo 3mm Front Outer Suspension Arm Pins for the BD9 2019. Compatibility Yokomo RS1.0  Yokomo RS2.0  

Yokomo 3mm Suspension Arm Pin Ball (4)

This is a pack of four replacement Yokomo 3mm Suspension Arm Pin Balls, and are intended for use with the Yokomo 1/10 scale touring car. Compatibility Yokomo RS1.0  Yokomo RS2.0  

Yokomo RS 1.0 2.0 Differential Maintenance Kit

Rebuild Overview: Yokomo RS 1.0 Differential Maintenance Kit. This is a replacement rebuild kit intended for the Yokomo RS 1.0. Package includes everything needed to rebuild one differential. Compatibility Yokomo RS1.0  Yokomo RS2.10  

Yokomo 3mm BD9 RS1.0 Rear Outer Suspension Arm Hinge Pin (2)

This is a pack of two replacement Yokomo 3mm Rear Outer Suspension Arm Hinge Pins for the BD9 2019 Compatibility Yokomo RS1.0  Yokomo RS2.10  

Yokomo RS 1.0 2.0 Gear Differential Gaskets (2)

Differential Gaskets Overview: Yokomo RS 1.0 Differential Gaskets. These replacement differential gaskets are intended for the Yokomo RS 1.0 Rookie Speed GT1. Package includes two gaskets. Compatibility Yokomo RS1.0  Yokomo RS2.10  

Protoform Venturi GT USGT Touring Car Sedan Body w/Wing (Clear) (190mm)

Protoform Venturi GT USGT Touring Car Sedan Clear Body, Fully approved for competition by USGT rules, Venturi GT is produced in high-quality clear polycarbonate, coming in at around 85-90g race-ready weight, This optional body is intended for 190mm...