ProTek Wires, Connectors, Fans

ProTek RC Heavy Duty 15cm (6") Servo Extension Lead (Male/Male)

This is one 15cm (6") universal male to male servo extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength. The male plugs installed on these...

ProTek RC Heavy Duty 14awg XT60 Charge Lead (Male XT60 to 4mm Banana Plugs)

This is a Heavy Duty "MaxxCurrent" XT60 Male Plug to 4mm Banana Plug Charge Lead from ProTek R/C. ProTek R/C "MaxxCurrent" XT60 connectors ensure a mechanically solid, low resistance, high-amp capacity connection and are the ideal power connector for...

ProTek RC XT60 to EC3 Adapter (Male XT60 to Female EC3)

This is a Male XT60 to Female EC3 plug adapter from ProTek R/C. This adapter will allow you to use batteries with an XT60 with a vehicle equipped with EC3 or IC3 plug; including vehicles from Losi, Arrma, Axial and more. Additionally, this adapter will...

ProTek RC 2S Male XH Balance Connector w/15cm 22awg Wire

This is a male XH connector for 2S. It has three wires and is used primarily to make adapter cords to mate batteries, chargers and balance boards.

ProTek RC Glow Ignitor Charge Lead (Ignitor Connector to 4mm Bullet Connector)

This is the ProTek R/C Glow Ignitor Charge Lead. This charge lead has a glow ignitor connector on one end that your glow ignitor will clip onto, connected to 4mm banana plugs, with high quality 18 AWG silicone wire, to connect to your battery charger...

ProTek RC 2S Charge/Balance Adapter (T-Style Ultra Plug to 4mm Bullet)

This is a 2S balance/charge adapter from ProTek R/C. This adapter is designed for 2S Li-Poly hard packs that use two 4mm bullet connectors for the main power connection, and a 2mm bullet connector for the balance connector. This adapter is approximately...

ProTek RC EC3 Style to T-Style Ultra Plug Adapter (Female EC3/Male Ultra)

This is a female EC3 style plug to male T-Style Ultra plug adapter from ProTek R/C.

ProTek RC EC3 Style to Large Tamiya Style Plug Adapter (Female EC3/Male Tamiya)

This is a female EC3 style plug to male Large Tamiya style plug adapter from ProTek R/C.

ProTek RC EC3 Style to Large Tamiya Style Plug Adapter (Male EC3/Female Tamiya)

This is a male EC3 style plug to female Tamiya style plug adapter from ProTek R/C.

ProTek RC Heavy Duty T-Style Ultra Plug Charge Lead Deans (Male to 4mm Banana)

This is the ProTek R/C Heavy Duty T-Style Charge Lead, featuring a T-style ultra plug on one end connected to 4mm banana plugs with high quality 14awg silicone wire.This charge lead can be used for heavy duty charging due to the 14awg wire, and can be...

ProTek RC JST Charge Lead (JST Female to 4mm Banana Plugs)

This is one JST connector charge lead lead from ProTek R/C. This charge lead has a JST style battery connector on one end connected to 4mm banana plugs with high quality 22awg silicone wire.  

ProTek RC Receiver Charge Lead (Futaba Female to 4mm Banana Plugs)

This is one receiver charge lead lead from ProTek R/C. This charge lead has a Futaba style battery connector on one end that will accept both Futaba and JR/Airtronics style battery connectors, connected to 4mm banana plugs with high quality 22awg...

ProTek RC Transmitter Charge Lead (DC Plug to 4mm Banana Plugs)

This is one transmitter charge lead from ProTek R/C. This charge lead has a DC style connector on one end (inner plug is Positive - 2.5mm, outer ring is Negative - 5.5mm) that will fit most radio systems, connected to 4mm banana plugs with high quality...

ProTek RC Heavy Duty 30cm (12") Servo Extension Lead (Male/Female)

This is one 30cm (12") universal servo extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength. The male plug installed on these extension leads...

ProTek RC Heavy Duty 15cm (6") Servo Extension Lead (Male/Female)

This is one 15cm (6") universal servo extension lead from ProTek R/C. These are excellent servo extension leads made with thick, high quality 22awg wire for maximum current carrying capacity and strength. The male plug installed on these extension leads...

ProTek RC JST Connector Set (1 Male/1 Female)

This is a set of one male and one female JST connector leads from ProTek R/C. The JST connectors are attached to 10cm of 20awg silicone wire.

ProTek RC Kyosho Mini-Z LiFe Battery Charging Wire Harness

This is a ProTek R/C Kyosho Mini-Z LiFe Battery Charging Wire Harness, and is intended for use with the ProTek R/C Kyosho Mini-Z LiFe battery.

ProTek RC JST Connectors (1 Male/1 Female)

This pack of ProTek RC JST Connectors includes one male connector, one female connector, and pins. These are unassembled, and can be used to repair a bad JST connector lead, or to construct your own JST leads.

ProTek RC 6.5mm Bullet Connector (3 Male/3 Female)

This is a pack of three pairs of 6.5mm diameter Bullet Connectors from ProTek R/C. There are total of three female and three male connectors in the package. These are an absolute must for high current / high voltage applications! With lower resistance...

ProTek RC Low Profile 5mm "Super Bullet" Solid Gold Connectors (2 Male)

This is a pack of two ProTek R/C Low Profile 5mm "Super Bullet" Solid Gold Connectors. ProTek R/C Low Profile bullets feature a redesigned solder point that incorporates a flat, low-profile head, for easy lay down solder jobs. With other bullets, the...