SHOP BY BRAND

Losi Super Baja Rey Center Diff Outdrive Set with Pins

Losi Super Baja Rey Center Diff Outdrive Set. Package includes replacement center diff outdrives and pins.

Losi Super Baja Rey Rear Axle Housing Set

Losi Super Baja Rey Rear Axle Housing Set. This is the replacement rear axle housing.

Losi Baja Rey SBR 2.0 Front Skid Plate & Support Brace

This is a replacement Losi Baja Rey SBR 2.0 Front Skid Plate and Support Brace, intended for use with the Super Baja Rey SBR 2.0 Desert Truck.

Losi Battery Tray: Super Rock Rey SBR 2.0

Losi Battery Tray: Super Rock Rey

Losi Steering Servo Arm, 15T Spline: Super Baja Rey

Losi Steering Servo Arm, 15T Spline: Super Baja Rey

Losi Super Baja Rey Servo Mount & Bellcrank Set

This is a replacement Losi Super Baja Rey Servo Mount and Bellcrank Set.

Losi Super Baja Rey Body Button Base & Top (22)

Losi Super Baja Rey Body Button Base & Top. These are the replacement upper and lower body buttons. Package includes the parts needed to assemble 22 body buttons.

Kyosho 5mm Vibration Absorption Gyro/Reciever Mounting Gel (1 Sheet)

This is one sheet of Kyosho Zeal vibration absorbing gyro and receiver mounting gel. This stuff is amazing for mounting gyros and receivers in Nitro helicopters where maximum vibration absorption is needed, combined with maximum mounting security. This...

Kyosho 3mm Vibration Absorption Tape Sheet (Blue)

This is a 145x45mm strip of Kyosho Vibration Absorption Tape. This tape is 3mm thick and features double sided vibration absorption tape. It provides damping characteristics when mounting electronics.

Kyosho MINI-Z Sports LED Light Set (MR-03S & Mini-Z 4X4)

The Kyosho MR-03S MINI-Z Sports LED Light Set features two clear and two red LEDs, and plugs in directly to the top of the board on chassis for easy installation. This gives you headlights and brake lights that light up according to throttle operation...

Kyosho Mini-Z 8.5mm Racing Radial Tire (4) (20 Shore)

This is a set of four Kyosho 8.5mm Racing Radial Tires. These radial tires are used with the Mini-Z Racer series kits, and feature a special patterned edge that is effective on both urethane and carpet surfaces. Specific left and right sides feature a...

Kyosho XSpeed Mini-Z Motor-V (MR-03EVO)

XSpeed Mini-Z Motor-V (MR-03EVO) Mini-Z X Speed brushed motor for MR03 Evo. I.C.S. USB adapter is required to change to brushed mode.

Kyosho XSPEED Motor-V (2.4GHz)

This is an optional Kyosho XSPEED Motor-V. This is a high revving motor that will help to improve maximum speed and acceleration, and has been optimized for use with 2.4GHz equipped Mini-Z vehicles. COMPATIBILITYKyosho MR-02Kyosho MR-03

Kyosho Mini-Z MR03 Circuit Wide Rear Tire Pack

This is a Kyosho MR03 Circuit Wide Rear Tire Pack, a set of options for MINI-Z RWD ideal for beginners. This pack contains a pair of 30-deg low height slick tires, two pairs of high grip wide radial tires (20-deg and 30-deg), pairs of red and purple...

Kyosho Mini-Z Tool Set 2

This a Kyosho Mini-Z Tool Set 2, intended for use with the Kyosho Mini-Zs. This set has improved tool tip shapes and includes various tools needed for maintaining a Mini-Z. This set cones in a soft case printed with a Mini-Z logo.

Kyosho Mini-Z LM Wide High Grip Rear Tire (4) (30 Shore)

This is a set of four Kyosho High Grip Front Tires, for use with the Kyosho Mini-Z MR LM Type chassis. Choose from 20, 30 and 40 Shore compounds (softest to hardest). 40 Shore is the standard compound included with Mini-Z MR LM kits, with 20 and 30 being...

Kyosho Mini-Z LM High Grip Front Tire (4) (30 Shore)

This is a set of four Kyosho High Grip Front Tires, for use with the Kyosho Mini-Z MR LM Type chassis. Choose from 20, 30 and 40 Shore compounds (softest to hardest). 40 Shore is the standard compound included with Mini-Z MR LM kits, with 20 and 30 being...

Kyosho Mini-Z LM High Grip Front Tire (4) (20 Shore)

This is a set of four Kyosho High Grip Front Tires, for use with the Kyosho Mini-Z MR LM Type chassis. Choose from 20, 30 and 40 Shore compounds (softest to hardest). 40 Shore is the standard compound included with Mini-Z MR LM kits, with 20 and 30 being...

Kyosho Mini-Z X-Speed V Motor

This is an optional Kyosho Mini-Z X-Speed V Motor, and is intended for use with the Kyosho Mini-Z MB-010 Ultima and Optima buggies, as well as the MA-010 and MA-015 AWD Mini-Z's. This is a high revving motor that provides increased top speed and...

Kyosho MA-020 2.0 Mini-Z Unit Set (RA-45)

Kyosho MA-020 2.0 Mini-Z Unit Set. This replacement unit set is intended for the AWD Kyosho MA-020 Mini-Z chassis. The built in receiver unit is designed to work with the FHSS KT531/431PT units. Package includes one R/C unit set.NOTE: Not compatible with...