SHOP BY BRAND

TQ Wire 2S Charge Cable w/4mm & 5mm Bullet Connector (2')

TQ Wire 2S Charge Cables use TQ's heavy duty 6-point bullets for the charger side and TQ's patent pending 4mm/5mm stepped bullet connectors for the battery to provide a clean charger to battery connection solution for enthusiasts that demand a pro...

TQ Wire Products 4mm + 5mm Bullet Low Profile Connectors (2)

TQ Wire Products 4mm + 5mm Bullet Low Profile Connectors (2). Dual diameter shaft for use with ESCs and batteries with 4mm and 5mm connectors. Fits flush on most 5mm batteries but will be approximately11mm higher on 4mm batteries.Includes (2) 4mm/5mm...

TQ Wire Products 4mm HD 18mm Bullet Connector (2)

TQ Wire Products 4mm HD 18mm Bullet Connector (2) 18mm length - 6 point contact base with a Heavy Duty taller crown and deeper recess for soldering. These are a snug fit and better connection for rough service conditions and for use on charger output...

TQ Wire Products 18mm 4mm Bullet Male Connectors (2)

TQ Wire Products 18mm 4mm Bullet Male Connectors (2)

Tekno RC Shock Cap Bushings (4pcs, requires TKR8727)

TKR8730 Tekno RC Shock Cap Bushings (4pcs, requires TKR8727). Increase the life of your shock caps with these new shock bushings! They are designed to snap in and key with the top surface, making it virtually impossible for the bushing to rotate and...

Tekno RC Plastic 1/8 Lightweight Buggy Wing (ROAR/IFMAR Legal) (Yellow)

The Tekno 1/8 Lightweight Buggy Wing has been designed to eliminate unnecessary material while maintaining the strength and durability Tekno is known for.Coming in at just 41 grams, it’s the lightest molded wing on the market by nearly 10 grams. As the...

Tekno RC Shock Tower (rear, carbon fiber, ET410)

TKR7281C Tekno RC Shock Tower (front, carbon fiber, ET410)

Tekno RC Driveshaft (f/r, hardened steel, ET410, 2pcs)

TKR7272 Tekno RC Driveshaft (f/r, hardened steel, ET410, 2pcs)

Tekno RC Turnbuckle (M3 thread, 78mm length, 4mm adjustment, 2pcs)

TKR7250 Tekno RC Turnbuckle (M3 thread, 78mm length, 4mm adjustment, 2pcs)

Tekno RC Shock Spring Set (rear, 1.3x8.875, 3.22lb/in, 63mm, red)

Tekno RC Shock Spring Set (rear, 1.3x8.875, 3.22lb/in, 63mm, red)

Tekno RC ET410 Front 3.5mm Pin Suspension Arm Set

This is an optional Tekno RC ET410 Front 3.5mm Pin Suspension Arm Set, intended for use with the ET410 Competition 1/10 Electric 4WD truggy to improve the durability of your kit. The arms have been modified to accept the larger HD 3.5mm hinge pins that...

Tekno RC ET410 Rear 3.5mm Pin Suspension Arm Set

This is an optional Tekno RC ET410 Rear 3.5mm Pin Suspension Arm Set, intended for use with the ET410 Competition 1/10 Electric 4WD truggy to improve the durability of your kit. The arms have been modified to accept the larger HD 3.5mm hinge pins that...

Tekno RC Diff Pinion (10t, ET410, use with TKR7221)

TKR7222 Tekno RC Diff Pinion (10t, ET410, use with TKR7221)

Tekno RC Differential Ring Gear (40t, ET410, use with TKR7222)

TKR7221 Tekno RC Differential Ring Gear (40t, ET410, use with TKR7222)

Tenko RC Body Mount Set (ET410)

TKR7210 Tenko RC Body Mount Set (ET410)

Tekno RC Shock Spring Set (rear, 1.2x9.38, 2.20lb/in, 53mm, pink)

Tekno RC Shock Spring Set (rear, 1.2x9.38, 2.20lb/in, 53mm, pink)

Tekno RC Shock Spring Set (front, 1.3x7.75, 3.85lb/in, 45mm, red)

Tekno RC Shock Spring Set (front, 1.3x7.75, 3.85lb/in, 45mm, red)

Tekno RC Shock Body (rear, aluminum, hard ano, ET410, 2pcs)

TKR6756 Tekno RC Shock Body (rear, aluminum, hard ano, ET410, 2pcs)

Tekno RC Shock Piston Set (8x1.2,8x1.3,flat/flat,13mm,4pcs)

Tekno RC Shock Piston Set (8x1.2,8x1.3,flat/flat,13mm,4pcs)

Tekno RC Shock Shafts (rear, steel, TiNi coated, EB410 ET410, 2pcs)

TKR6704T Tekno RC Shock Shafts (rear, steel, TiNi coated, EB410 ET410, 2pcs)