NEW ARRIVALS

Racers Edge Quick-Repair Solder Tubes for 24-26 AWG Wire (6)

Quick-Repair Solder Tubes for 24-26 AWG Wire (6)Racers Edge Solder Tubes allow for fast and easy wire repairs at the track, flight line, or workbench without a soldering iron. Simply choose the appropriate size, place the unshielded wires to be soldered...

Racers Edge Universal RX Power Splitter, Female Servo x 2 & JST x 2

Many Crawler and Scaler enthusiasts find it most convenient to power their accessories (lights, winches, etc.) through an unused receiver port. This harness allows up to four accessories to be powered and is offered in two versions: one with four...

Racers Edge Universal RX Power Splitter, Female Servo x 4

Many Crawler and Scaler enthusiasts find it most convenient to power their accessories (lights, winches, etc.) through an unused receiver port. This harness allows up to four accessories to be powered and is offered in two versions: one with four...

Racers Edge Battery Adapter: Female Deans to 4mm Bullets w/ 2S XH Balance Plug (150mm wire)

This adapter allows the use of any LiPo with 4mm female bullet outputs to be used in a vehicle utilizing Deans connectors (T-Plug). Also includes a JST-XH balance connector for convenient charging.

Racers Edge 5-Function Mini/Micro Charge Adapter to Male 4mm Bullets-300mm

Racer's Edge provides a convenient charging solution for mini and micro air or surface models. Includes five of the most popular connectors in this category: Mini-Molex (Tamiya), JR-type receiver, JST, Hubsan-type, and Micro BLH/EFL.

Racers Edge Charge Adapter: Male Tamiya to Male 4mm Bullets, 300mm Wire

Racers Edge offers a safe and convenient way to charge batteries equipped with a Tamiya-style Molex connector using any charger with 4mm outputs. The overall length of 300mm (12") provides adequate distance between battery and charger and also allows for...

Racers Edge Battery/ESC Adapter: Female TRX HC to Male Deans (T-Plug)

Why cut wires and solder connectors? This convenient adapter from Racer's Edge allows you to connect a battery with a Tamiya connector to an ESC equipped with a Deans plug.

Racers Edge Battery/ESC Adapter: Male Tamiya to Female Deans (T-Plug)

Tired of cutting wires and soldering connectors? This convenient adapter from Racer's Edge allows you to connect a battery with a Tamiya connector to an ESC equipped with a Deans plug.

Racers Edge Battery/ESC Adapter: Female Tamiya to Male Deans (T-Plug)

Racer's Edge Why cut wires and solder connectors? This convenient adapter from Racer's Edge allows you to connect a battery with a Deans connector to an ESC equipped with a Tamiya plug.

RC4WD Dirt Grabber 1.0" All Terrain Tires (2) SCX24

RC4WD Dirt Grabber 1.0" All Terrain Tires SCX24 Specifications:Advanced X4 CompoundOuter Diameter: 1.97in / 50mmWidth: 0.7in / 18mmInner Diameter: 1in / 25.4mmEach Tire Weight: 0.25oz / 7gWhat's Included:2x Dirt Grabber 1.0" All Terrain Tires2x Foam...

RC4WD Rock Crusher 1.0" Micro Crawler Tires (2)

This is a set of two RC4WD Rock Crusher 1.0 Micro Crawler Tires. Rock Crusher just got a lot smaller! Super strong sidewalls and extremely deep lugs. Made for the most demanding off-road competitors and hardcore crawlers! X3 advanced...

RC4WD Lighting Unit Mini ON/OFF Switch

The RC4WD Lighting Unit Mini ON/OFF Switch creates an easy plug and play on/off switch for your light bars and other items. Simply install in between your lights and battery, or between your lights and receiver. The push button style switch can be easily...

Danchee Ridgerock Rear 380 Motor (B)

Danchee Ridgerock Rear 380 Motor (B)

Danchee Ridgerock Front 380 Motor (A)

Danchee Ridgerock Front 380 Motor (A).

ProTek RC 4x6mm "High Strength" Socket Head Cap Screws (10)

This is a pack of ten 4x6mm "High Strength" Socket Head Cap Screws from ProTek R/C. These are made from metric grade 12.9 steel which has a minimum tensile strength of 174,000 PSI. These screws are the strongest you can get and are suitable for the most...

ProTek RC XH Multi-Adapter Balance Board (2S-6S) (ProTek, Align, E-Flite) w/Cable

This is the ProTek R/C Multi-Adapter Balance Board for the ProTek R/C Prodigy 6S, Hyperion 6S or any other 6S Balance Charger that uses XH compatible balance ports. This adapter allows you to balance from 2S to 6S batteries via one harness. Great adapter...

ProTek RC Small Body Clip (10) (1/12 Scale)

The ProTek R/C Small Body Clips are heavy duty, chrome plated body clips that are perfect for 1/12 scale size vehicles. Package includes ten body clips.

ProTek RC Extra Small Body Clip (10)

The ProTek R/C Extra Small Body Clips are heavy duty, chrome plated body clips that are perfect for 1/18 size vehicles. Package includes ten body clips.

ProTek RC 1S USB LiPo Charger (1 Amp) (Sanwa M17 & MT44)

The ProTek RC 1S USB LiPo Charger was developed specifically for ProTek RC PTK-5197 and PTK-5550 1S LiPo transmitter batteries. Have you found that your charger is not fully peaking your transmitter packs? Some high end chargers struggle to put a full...

ProTek RC Sprue Side Cutter

The ProTek RC Sprue Cutter is a great option for cutting plastic parts free, modifying tire pins and even thin gauge wire. Made from hardened stainless steel, these cutters feature comfortable grips with a heavy-duty return spring for better cutting...