NEW ARRIVALS

TQ Wire Products Sensor Cable 150mm

TQ Wire Products No Tweak Sensor Cable are made from high quality silicone insulated wire and tube. These units are extremely soft and flexible. They will not tweak 12th scale or pan cars. The silicone wires are burn resistant and crimped at the...

TQ Wire Products Sensor Cable 125mm

TQ Wire Products No Tweak Sensor Cable are made from high quality silicone insulated wire and tube. These units are extremely soft and flexible. They will not tweak 12th scale or pan cars. The silicone wires are burn resistant and crimped at the...

TQ Wire Products Sensor Cable 110mm

TQ Wire Products No Tweak Sensor Cable are made from high quality silicone insulated wire and tube. These units are extremely soft and flexible. They will not tweak 12th scale or pan cars. The silicone wires are burn resistant and crimped at the...

TQ Wire Products Sensor Cable 100mm

TQ Wire Products No Tweak Sensor Cable are made from high quality silicone insulated wire and tube. These units are extremely soft and flexible. They will not tweak 12th scale or pan cars. The silicone wires are burn resistant and crimped at the...

TQ Wire Products Sensor Cable 70mm

TQ Wire Products No Tweak Sensor Cable are made from high quality silicone insulated wire and tube. These units are extremely soft and flexible. They will not tweak 12th scale or pan cars. The silicone wires are burn resistant and crimped at the...

TQ Wire 4S Charge Cable w/4mm & 5mm Bullet Connector (2')

TQ Wire 4S Charge Cables use TQ's heavy duty 6-point bullets for the charger side and TQ's patent pending 4mm/5mm stepped bullet connectors for the battery to provide a clean charger to battery connection solution for enthusiasts that demand a pro...

TQ Wire 2S Charge Cable w/4mm & 5mm Bullet Connector (2')

TQ Wire 2S Charge Cables use TQ's heavy duty 6-point bullets for the charger side and TQ's patent pending 4mm/5mm stepped bullet connectors for the battery to provide a clean charger to battery connection solution for enthusiasts that demand a pro...

TQ Wire Products 4mm + 5mm Bullet Low Profile Connectors (2)

TQ Wire Products 4mm + 5mm Bullet Low Profile Connectors (2). Dual diameter shaft for use with ESCs and batteries with 4mm and 5mm connectors. Fits flush on most 5mm batteries but will be approximately11mm higher on 4mm batteries.Includes (2) 4mm/5mm...

TQ Wire Products 4mm HD 18mm Bullet Connector (2)

TQ Wire Products 4mm HD 18mm Bullet Connector (2) 18mm length - 6 point contact base with a Heavy Duty taller crown and deeper recess for soldering. These are a snug fit and better connection for rough service conditions and for use on charger output...

Team Losi Racing Tire Glue 1oz THIN

Team Losi Racing Tire Glue 1oz THIN. Specially Formulated quick setting Adhesive for Model Car Tires.

Team Losi Racing Silicone Differential Oil (30ml) (6,000cst)

This is a 30ml tube of Team Losi Racing silicone differential oil. This differential oil is used for 1/8th scale off road buggies, truggies (and some 1/10th scale on-road touring cars). The thicker the oil, the less your differential will "diff out" in...

Team Losi Racing Silicone Differential Fluid, 80,000CS

Team Losi Racing Silicone Differential Fluid, 80,000CS

Team Losi Racing Silicone Shock Oil, 37.5 Wt, 4oz

Team Losi Racing Silicone Shock Oil, 32.5 Wt, 4oz

Team Losi Racing Shock Bladder, Reinforced (4) 8IGHT-X

Team Losi Racing Shock Bladder, Reinforced (4) 8IGHT-X

Team Losi Racing Anti-squat Block, LRC, Aluminum: 22 3.0/4.0

Team Losi Racing Anti-squat Block, LRC, Aluminum: 22 3.0/4.0

Team Losi Racing Shock Piston 12mm 1.1mmx4 CNC Machined (4):All 22, SCTE

Team Losi Racing Shock Piston 12mm 1.1mmx4 CNC Machined (4):All 22, SCTE. Through continued testing with the 22 platform shocks on the SCTE vehicles, the race team has found a much improved balance with the 4-hole pistons providing the best balance for...

Team Losi Racing Diff Nut Spec Racer (2) 22 3.0 SR

Team Losi Racing CVA Driveshaft Bone Aluminum (2) 22 3.0 SR

Team Losi Racing Rear Side Belt Adjustment Inserts, 0 (2): 22-4

Team Losi Racing Rear Side Belt Adjustment Inserts, 0 (2) for the 22-4. The TLR Race team had found they can easily run the side belt using the loosest (#1) tensioners, and an even looser option was needed for SPEC racing. After lots of testing, we’ve...

Tekno RC Turnbuckle (M3 thread, 78mm length, 4mm adjustment, 2pcs)

TKR7250 Tekno RC Turnbuckle (M3 thread, 78mm length, 4mm adjustment, 2pcs)

Tekno RC ET410 Rear 3.5mm Pin Suspension Arm Set

This is an optional Tekno RC ET410 Rear 3.5mm Pin Suspension Arm Set, intended for use with the ET410 Competition 1/10 Electric 4WD truggy to improve the durability of your kit. The arms have been modified to accept the larger HD 3.5mm hinge pins that...