(EM) Accessories & Fans

Powerhobby Heat Sink w Twin Turbo High Speed Cooling Fans 1/8 Motors-Orange

Heat Sink features a lightweight aluminum construction with a dual cooling fan design. The heat sink is compatible with 1/8 scale motors around 40.8mm diameter and 57.9mm in length and includes two 30x30x10mm high-speed fans that peak around 18,000RPM...

Power Hobby Heat Sink w/ Twin Tornado High Speed Fans, for 1/8 Motors, Blue

Heat Sink features a lightweight aluminum construction with a dual cooling fan design. The heat sink is compatible with 1/8 scale motors around 40.8mm diameter and 57.9mm in length and includes two 30x30x10mm high-speed fans that peak around 18,000RPM...

Power Hobby Power Hobby Heat Sink w/ Twin Tornado High Speed Fans, for 1/8 Motors, Black

Heat Sink features a lightweight aluminum construction with a dual cooling fan design. The heat sink is compatible with 1/8 scale motors around 40.8mm diameter and 57.9mm in length and includes two 30x30x10mm high-speed fans that peak around 18,000RPM...

Powerhobby Aluminum Motor Heatsink & Cooling Fan For 1/8 Size Motors, Red

Heat is the enemy, especially when it comes to electric motors. Keep your temperatures in check and your motor running efficient and cool with our Motor Heatsink with Twin Cooling Fan. The motor heatsink clips right onto your 1/8 sized motor, and...

Power Hobby Aluminum Motor Heatsink & Cooling Fan For 1/8 Size Motors, Blue

Heat is the enemy, especially when it comes to electric motors. Keep your temperatures in check and your motor running efficient and cool with our Motor Heatsink with Twin Cooling Fan. The motor heatsink clips right onto your 1/8 sized motor, and...

Miniatronics Rosin Soldering Flux Paste (2oz)

This is a two ounce container of Rosin Soldering Flux Paste. Flux helps clean and pre-tin the solder tip in preparation of the next solder joint. Rosin fluxes are non-corrosive, non-conductive and efficient.

Rosin Core Solder 60/40, 1/2oz

Rosin Core Solder 60/40, 4oz This solder is not only great for hobby projects but good all electrical applications. The melting temperature for this solder is 374 degrees Fahrenheit. Key Features: Designed For Electrical & Electronic Work 60% Tin, 40%...

Rosin Core Solder 60/40, 4oz

Rosin Core Solder 60/40, 4oz This solder is not only great for hobby projects but good all electrical applications. The melting temperature for this solder is 374 degrees Fahrenheit. Key Features: Designed For Electrical & Electronic Work 60% Tin, 40%...

Kyosho 5mm Vibration Absorption Gyro/Reciever Mounting Gel (1 Sheet)

This is one sheet of Kyosho Zeal vibration absorbing gyro and receiver mounting gel. This stuff is amazing for mounting gyros and receivers in Nitro helicopters where maximum vibration absorption is needed, combined with maximum mounting security. This...

Kyosho 3mm Vibration Absorption Tape Sheet (Blue)

This is a 145x45mm strip of Kyosho Vibration Absorption Tape. This tape is 3mm thick and features double sided vibration absorption tape. It provides damping characteristics when mounting electronics.

Killerbody Smokey Exhaust Pipe w/LED Unit

The Killerbody Smokey Exhaust Pipe with LED Unit is a great way to add ultimate realism to your RC drift car, touring car or rock crawler. This system features a smoking exhaust pipe with a built in red LED to simulate backfire as you drive. Simply...

Hobbywing XR8 Cooling Fan 30x30x10

Hi Performance ESC Cooling Fan 3010BH-6V, for XR8 and XR8 SCT BlackFeatures:Power: 5V/0.18A6V/10000RPMNot waterproofJR-3P Male PlugSpecifications:Length: 30mmWidth: 30mmHeight: 10mmWeight: 8.2g

Hobbywing OTA Bluetooth Smartphone ESC Module Programmer

The Hobbywing OTA Smartphone ESC Module Programmer is designed to wirelessly connect your ESC to your smartphone, using the Hobbywing HW Link APP to clearly display and adjust all parameters of the ESC. The graphical man-machine interface of drop-down...

Hobbywing 1:8 Electronic Power Switch, for XR8

This Electronic Power Switch controls the ON/OFF of current flow electronically. This helps solving problems caused by vibration or oxidation of contacts conventional mechanical switches have.

Hobbywing JST Port Convertor Cable

Hobbywing JST Port Convertor Cable. This is an optional part intended to convert the waterproof sensor cable used on the EZRUN MAX8 G2 and MAX4-HV ESC's. This allows the use of a standard sensored brushless motor. Package includes one JST port converter...

Hobbywing 25A HV UBEC

Hobbywing HV 25A UBEC offers elegance, power, extended protection features, and simplicity all in a compact solution. Housed inside of an aluminum case, the UBEC is able to dissipate more head and reduce electromagnetic interference. A high efficiency...

Hobbywing LED Program Card

The Hobbywing LED Program Card is used to program Hobbywing ESC's. It features a user friendly interface and is easy to use. Package includes program box and 3-wire male/male plug for hooking the programmer to the ESC.Compatible With:Platinum V1/V2...

Hot Racing Clip-On Two-Piece Motor Heat Sink w/Fan (Blue)

Hot Racing Clip-On Two-Piece Motor Heat Sink is compatible with 540 and 550 size motors. Versatile two-piece heat sink clip provides 8 different width adjustments.Features:Keeps the motor running coolerAluminum constructionClip on heat sink attaches to...

Hot Racing Kraton/Outcast 8S Twin 40mm Twister Motor Cooling Fan Kit (11.1V)

The Hot Racing Kraton/Outcast 8S Twin 40mm Twister Motor Cooling Fan Kit is a great way to help regulate temperatures in any application that is compatible with the Arrma ARA390296 heat sink. Capable of 7.2 to 12V input, this system features open ended...

Dynamite EC5 Charge Cable with 10awg wire

This is a Dynamite EC5 Device Charge Lead. This charge lead features two 4mm banana style bullets fixed to 10awg wire.